Use x86 machine for NAS
This commit is contained in:
parent
7f1e304012
commit
cb2ac1c1ba
@ -73,7 +73,7 @@
|
|||||||
"liza" = mkSystem "x86_64-linux" nixpkgs ./machines/liza/configuration.nix;
|
"liza" = mkSystem "x86_64-linux" nixpkgs ./machines/liza/configuration.nix;
|
||||||
"ponyo" = mkSystem "x86_64-linux" nixpkgs ./machines/ponyo/configuration.nix;
|
"ponyo" = mkSystem "x86_64-linux" nixpkgs ./machines/ponyo/configuration.nix;
|
||||||
"router" = mkSystem "x86_64-linux" nixpkgs-unstable ./machines/router/configuration.nix;
|
"router" = mkSystem "x86_64-linux" nixpkgs-unstable ./machines/router/configuration.nix;
|
||||||
"s0" = mkSystem "aarch64-linux" nixpkgs-unstable ./machines/storage/s0/configuration.nix;
|
"s0" = mkSystem "x86_64-linux" nixpkgs-unstable ./machines/storage/s0/configuration.nix;
|
||||||
"n1" = mkSystem "aarch64-linux" nixpkgs ./machines/compute/n1/configuration.nix;
|
"n1" = mkSystem "aarch64-linux" nixpkgs ./machines/compute/n1/configuration.nix;
|
||||||
"n2" = mkSystem "aarch64-linux" nixpkgs ./machines/compute/n2/configuration.nix;
|
"n2" = mkSystem "aarch64-linux" nixpkgs ./machines/compute/n2/configuration.nix;
|
||||||
"n3" = mkSystem "aarch64-linux" nixpkgs ./machines/compute/n3/configuration.nix;
|
"n3" = mkSystem "aarch64-linux" nixpkgs ./machines/compute/n3/configuration.nix;
|
||||||
|
|||||||
@ -2,29 +2,19 @@
|
|||||||
|
|
||||||
{
|
{
|
||||||
imports =[
|
imports =[
|
||||||
./helios64
|
|
||||||
./hardware-configuration.nix
|
./hardware-configuration.nix
|
||||||
];
|
];
|
||||||
|
|
||||||
networking.hostName = "s0";
|
networking.hostName = "s0";
|
||||||
|
|
||||||
boot.loader.grub.enable = false;
|
|
||||||
boot.loader.generic-extlinux-compatible.enable = true;
|
|
||||||
|
|
||||||
system.autoUpgrade.enable = true;
|
system.autoUpgrade.enable = true;
|
||||||
|
|
||||||
boot.supportedFilesystems = [ "bcachefs" ];
|
|
||||||
|
|
||||||
services.zerotierone.enable = true;
|
services.zerotierone.enable = true;
|
||||||
|
|
||||||
# for education purposes only
|
# for education purposes only
|
||||||
services.pykms.enable = true;
|
services.pykms.enable = true;
|
||||||
services.pykms.openFirewallPort = true;
|
services.pykms.openFirewallPort = true;
|
||||||
|
|
||||||
users.users.googlebot.packages = with pkgs; [
|
|
||||||
bcachefs-tools
|
|
||||||
];
|
|
||||||
|
|
||||||
services.samba.enable = true;
|
services.samba.enable = true;
|
||||||
|
|
||||||
services.navidrome = {
|
services.navidrome = {
|
||||||
|
|||||||
@ -1,6 +1,3 @@
|
|||||||
# Do not modify this file! It was generated by ‘nixos-generate-config’
|
|
||||||
# and may be overwritten by future invocations. Please make changes
|
|
||||||
# to /etc/nixos/configuration.nix instead.
|
|
||||||
{ config, lib, pkgs, modulesPath, ... }:
|
{ config, lib, pkgs, modulesPath, ... }:
|
||||||
|
|
||||||
{
|
{
|
||||||
@ -8,51 +5,58 @@
|
|||||||
[ (modulesPath + "/installer/scan/not-detected.nix")
|
[ (modulesPath + "/installer/scan/not-detected.nix")
|
||||||
];
|
];
|
||||||
|
|
||||||
boot.initrd.availableKernelModules = [
|
# boot
|
||||||
"ahci"
|
efi.enable = true;
|
||||||
"usb_storage"
|
boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "nvme" "usb_storage" "uas" "sd_mod" "rtsx_pci_sdmmc" ];
|
||||||
"bcache"
|
|
||||||
];
|
|
||||||
boot.initrd.kernelModules = [ ];
|
boot.initrd.kernelModules = [ ];
|
||||||
boot.kernelModules = [ ];
|
boot.kernelModules = [ "kvm-intel" ];
|
||||||
boot.extraModulePackages = [ ];
|
boot.extraModulePackages = [ ];
|
||||||
|
|
||||||
boot.initrd.luks.devices."enc-pv1" = {
|
# firmware
|
||||||
device = "/dev/disk/by-uuid/e3b588b6-d07f-4221-a194-e1e900299752";
|
firmware.x86_64.enable = true;
|
||||||
allowDiscards = true; # SSD
|
|
||||||
};
|
|
||||||
boot.initrd.luks.devices."enc-pv2".device = "/dev/disk/by-uuid/514231c1-5934-401f-80e1-e3b6b62dc9d5";
|
|
||||||
boot.initrd.luks.devices."enc-pv3".device = "/dev/disk/by-uuid/f45abe73-d0c6-446f-b28c-7a96a3f87851";
|
|
||||||
boot.initrd.luks.devices."enc-pv4".device = "/dev/disk/by-uuid/e2c7402a-e72c-4c4a-998f-82e4c10187bc";
|
|
||||||
boot.initrd.luks.devices."enc-pv5".device = "/dev/disk/by-uuid/5d1002b8-a0ed-4a1c-99f5-24b8816d9e38";
|
|
||||||
boot.initrd.luks.devices."enc-pvUSB" = {
|
|
||||||
device = "/dev/disk/by-uuid/c8e18f86-a950-4e4e-8f3c-366cc78db29b";
|
|
||||||
allowDiscards = true; # SSD
|
|
||||||
};
|
|
||||||
|
|
||||||
|
### disks ###
|
||||||
|
|
||||||
|
# zfs
|
||||||
|
networking.hostId = "5e6791f0";
|
||||||
|
boot.supportedFilesystems = [ "zfs" ];
|
||||||
|
boot.kernelPackages = config.boot.zfs.package.latestCompatibleLinuxPackages;
|
||||||
|
|
||||||
|
# luks
|
||||||
|
boot.initrd.luks.devices."enc-pv1".device = "/dev/disk/by-uuid/d52e99a9-8825-4d0a-afc1-8edbef7e0a86";
|
||||||
|
boot.initrd.luks.devices."enc-pv2".device = "/dev/disk/by-uuid/f7275585-7760-4230-97de-36704b9a2aa3";
|
||||||
|
boot.initrd.luks.devices."enc-pv3".device = "/dev/disk/by-uuid/5d1002b8-a0ed-4a1c-99f5-24b8816d9e38";
|
||||||
|
boot.initrd.luks.devices."enc-pv4".device = "/dev/disk/by-uuid/e2c7402a-e72c-4c4a-998f-82e4c10187bc";
|
||||||
|
|
||||||
|
# mounts
|
||||||
fileSystems."/" =
|
fileSystems."/" =
|
||||||
{ device = "/dev/mapper/enc-pv1:/dev/mapper/enc-pv2:/dev/mapper/enc-pv3:/dev/mapper/enc-pv4:/dev/mapper/enc-pv5:/dev/mapper/enc-pvUSB";
|
{ device = "rpool/nixos/root";
|
||||||
fsType = "bcachefs";
|
fsType = "zfs"; options = [ "zfsutil" "X-mount.mkdir" ];
|
||||||
|
};
|
||||||
|
fileSystems."/home" =
|
||||||
|
{ device = "rpool/nixos/home";
|
||||||
|
fsType = "zfs"; options = [ "zfsutil" "X-mount.mkdir" ];
|
||||||
|
};
|
||||||
|
fileSystems."/var/lib" =
|
||||||
|
{ device = "rpool/nixos/var/lib";
|
||||||
|
fsType = "zfs"; options = [ "zfsutil" "X-mount.mkdir" ];
|
||||||
|
};
|
||||||
|
fileSystems."/var/log" =
|
||||||
|
{ device = "rpool/nixos/var/log";
|
||||||
|
fsType = "zfs"; options = [ "zfsutil" "X-mount.mkdir" ];
|
||||||
};
|
};
|
||||||
|
|
||||||
|
fileSystems."/data" =
|
||||||
|
{ device = "rpool/nixos/data";
|
||||||
|
fsType = "zfs"; options = [ "zfsutil" "X-mount.mkdir" ];
|
||||||
|
};
|
||||||
fileSystems."/boot" =
|
fileSystems."/boot" =
|
||||||
{ device = "/dev/disk/by-uuid/8F7E-53C4";
|
{ device = "/dev/disk/by-uuid/4FB4-738E";
|
||||||
fsType = "vfat";
|
fsType = "vfat";
|
||||||
};
|
};
|
||||||
|
swapDevices = [ ];
|
||||||
|
|
||||||
swapDevices = [
|
networking.interfaces.eth0.useDHCP = true;
|
||||||
{
|
|
||||||
device = "/dev/mmcblk1p2";
|
|
||||||
randomEncryption.enable = true;
|
|
||||||
}
|
|
||||||
];
|
|
||||||
|
|
||||||
# The global useDHCP flag is deprecated, therefore explicitly set to false here.
|
powerManagement.cpuFreqGovernor = "powersave";
|
||||||
# Per-interface useDHCP will be mandatory in the future, so this generated config
|
|
||||||
# replicates the default behaviour.
|
|
||||||
networking.useDHCP = lib.mkDefault false;
|
|
||||||
networking.interfaces.eth0.useDHCP = lib.mkDefault true;
|
|
||||||
networking.interfaces.eth1.useDHCP = lib.mkDefault true;
|
|
||||||
|
|
||||||
powerManagement.cpuFreqGovernor = lib.mkDefault "ondemand";
|
|
||||||
}
|
}
|
||||||
|
|||||||
@ -1,62 +0,0 @@
|
|||||||
Kobol Helios64
|
|
||||||
==============
|
|
||||||
|
|
||||||
The `default.nix` module provides the required setup for the system to work.
|
|
||||||
|
|
||||||
The `recommended.nix` module adds recommended settings for the system.
|
|
||||||
|
|
||||||
Status
|
|
||||||
------
|
|
||||||
|
|
||||||
### Works
|
|
||||||
|
|
||||||
- SATA hard drives
|
|
||||||
- Ethernet (1gbps)
|
|
||||||
- Serial through USB type-c (`ttyS2`)
|
|
||||||
|
|
||||||
### Untested
|
|
||||||
|
|
||||||
- Ethernet (2.5gbps)
|
|
||||||
- DP video out
|
|
||||||
- UPS behaviour
|
|
||||||
- `rootfs` on SATA drives
|
|
||||||
|
|
||||||
### Disabled
|
|
||||||
|
|
||||||
Due to misbehaviour, `ttyS0` (`&uart0`, `serial@ff180000`) has been disabled
|
|
||||||
via a kernel patch.
|
|
||||||
|
|
||||||
Without this change, using, or attempting to use `ttyS0` will break serial
|
|
||||||
output from `ttyS2`.
|
|
||||||
|
|
||||||
|
|
||||||
Kernel
|
|
||||||
------
|
|
||||||
|
|
||||||
Only Linux 5.10 (LTS) is supported, using the patch set derived from Armbian.
|
|
||||||
|
|
||||||
|
|
||||||
Requirements
|
|
||||||
------------
|
|
||||||
|
|
||||||
A *platform firmware* needs to be provided out of band for the system.
|
|
||||||
|
|
||||||
The author recommends Tow-Boot, for which a [draft pull request](https://github.com/Tow-Boot/Tow-Boot/pull/54)
|
|
||||||
adds support for the Helios64.
|
|
||||||
|
|
||||||
Any other supported *platform firmware* should work too.
|
|
||||||
|
|
||||||
> **NOTE**: at the time of writing (2021-10-10) the *platform firmware*
|
|
||||||
> **must** make use of the proprietary ram training. The open source equivalent
|
|
||||||
> will make the system unstable, and worse, will cause silent memory
|
|
||||||
> corruption, in addition to loud memory corruption.
|
|
||||||
|
|
||||||
|
|
||||||
Notes
|
|
||||||
-----
|
|
||||||
|
|
||||||
### Baud rate
|
|
||||||
|
|
||||||
The serial baud rate is configured for `115200`, which is a more common default
|
|
||||||
than the usual for Rockchip at `1500000`. See [the rationale for the decision](https://github.com/Tow-Boot/Tow-Boot/pull/33).
|
|
||||||
|
|
||||||
@ -1,27 +0,0 @@
|
|||||||
{ config, pkgs, lib, ... }:
|
|
||||||
|
|
||||||
{
|
|
||||||
imports = [
|
|
||||||
./modules/fancontrol.nix
|
|
||||||
./modules/heartbeat.nix
|
|
||||||
./modules/ups.nix
|
|
||||||
];
|
|
||||||
|
|
||||||
boot.kernelParams = lib.mkAfter [
|
|
||||||
"console=ttyS2,115200n8"
|
|
||||||
"earlycon=uart8250,mmio32,0xff1a0000"
|
|
||||||
];
|
|
||||||
|
|
||||||
# Required for rootfs on sata
|
|
||||||
boot.initrd.availableKernelModules = [
|
|
||||||
"pcie-rockchip-host" # required for rootfs on pcie sata disks
|
|
||||||
"phy-rockchip-pcie" # required for rootfs on pcie sata disks
|
|
||||||
"phy-rockchip-usb" # maybe not needed
|
|
||||||
"uas" # required for rootfs on USB 3.0 sata disks
|
|
||||||
];
|
|
||||||
|
|
||||||
# bcachefs kernel is 5.15. but need patches that are only in 5.16+
|
|
||||||
# Patch the device tree to add support for getting the cpu thermal temp
|
|
||||||
hardware.deviceTree.enable = true;
|
|
||||||
hardware.deviceTree.kernelPackage = pkgs.linux_latest;
|
|
||||||
}
|
|
||||||
@ -1,23 +0,0 @@
|
|||||||
# Helios64 persistent hwmon
|
|
||||||
|
|
||||||
ACTION=="remove", GOTO="helios64_hwmon_end"
|
|
||||||
|
|
||||||
#
|
|
||||||
KERNELS=="fan1", SUBSYSTEMS=="platform", ENV{_HELIOS64_FAN_}="p6", ENV{_IS_HELIOS64_FAN_}="1", ENV{IS_HELIOS64_HWMON}="1"
|
|
||||||
KERNELS=="fan2", SUBSYSTEMS=="platform", ENV{_HELIOS64_FAN_}="p7", ENV{_IS_HELIOS64_FAN_}="1", ENV{IS_HELIOS64_HWMON}="1"
|
|
||||||
KERNELS=="2-004c", SUBSYSTEMS=="i2c", DRIVERS=="lm75", ENV{IS_HELIOS64_HWMON}="1"
|
|
||||||
|
|
||||||
SUBSYSTEM!="hwmon", GOTO="helios64_hwmon_end"
|
|
||||||
|
|
||||||
ENV{HWMON_PATH}="/sys%p"
|
|
||||||
#
|
|
||||||
ATTR{name}=="cpu_thermal", ENV{IS_HELIOS64_HWMON}="1", ENV{HELIOS64_SYMLINK}="/dev/thermal-cpu"
|
|
||||||
#
|
|
||||||
ENV{IS_HELIOS64_HWMON}=="1", ATTR{name}=="lm75", ENV{HELIOS64_SYMLINK}="/dev/thermal-board"
|
|
||||||
ENV{_IS_HELIOS64_FAN_}=="1", ENV{HELIOS64_SYMLINK}="/dev/fan-$env{_HELIOS64_FAN_}"
|
|
||||||
|
|
||||||
#
|
|
||||||
ENV{IS_HELIOS64_HWMON}=="1", RUN+="/bin/ln -sf $env{HWMON_PATH} $env{HELIOS64_SYMLINK}"
|
|
||||||
|
|
||||||
LABEL="helios64_hwmon_end"
|
|
||||||
|
|
||||||
@ -1,11 +0,0 @@
|
|||||||
ACTION=="add", GOTO="helios64_ups_end"
|
|
||||||
ACTION=="remove", GOTO="helios64_ups_end"
|
|
||||||
|
|
||||||
# Power loss event
|
|
||||||
ACTION=="change", SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTRS{online}=="0", RUN+="/usr/bin/systemctl start helios64-ups.timer"
|
|
||||||
|
|
||||||
# Power restore event
|
|
||||||
ACTION=="change", SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTRS{online}=="1", RUN+="/usr/bin/systemctl stop helios64-ups.timer"
|
|
||||||
|
|
||||||
LABEL="helios64_ups_end"
|
|
||||||
|
|
||||||
@ -1,41 +0,0 @@
|
|||||||
{ pkgs, ... }:
|
|
||||||
{
|
|
||||||
hardware.fancontrol.enable = true;
|
|
||||||
hardware.fancontrol.config = ''
|
|
||||||
# Helios64 PWM Fan Control Configuration
|
|
||||||
# Temp source : /dev/thermal-cpu
|
|
||||||
INTERVAL=10
|
|
||||||
FCTEMPS=/dev/fan-p6/pwm1=/dev/thermal-cpu/temp1_input /dev/fan-p7/pwm1=/dev/thermal-cpu/temp1_input
|
|
||||||
MINTEMP=/dev/fan-p6/pwm1=40 /dev/fan-p7/pwm1=40
|
|
||||||
MAXTEMP=/dev/fan-p6/pwm1=80 /dev/fan-p7/pwm1=80
|
|
||||||
MINSTART=/dev/fan-p6/pwm1=60 /dev/fan-p7/pwm1=60
|
|
||||||
MINSTOP=/dev/fan-p6/pwm1=29 /dev/fan-p7/pwm1=29
|
|
||||||
MINPWM=20
|
|
||||||
'';
|
|
||||||
|
|
||||||
services.udev.packages = [
|
|
||||||
# Fan control
|
|
||||||
(pkgs.callPackage (
|
|
||||||
{ stdenv, lib, coreutils }:
|
|
||||||
stdenv.mkDerivation {
|
|
||||||
name = "helios64-udev-fancontrol";
|
|
||||||
|
|
||||||
dontUnpack = true;
|
|
||||||
dontBuild = true;
|
|
||||||
|
|
||||||
installPhase = ''
|
|
||||||
mkdir -p "$out/etc/udev/rules.d/";
|
|
||||||
install -Dm644 "${./bsp/90-helios64-hwmon.rules}" \
|
|
||||||
"$out/etc/udev/rules.d/90-helios64-hwmon.rules"
|
|
||||||
substituteInPlace "$out/etc/udev/rules.d/90-helios64-hwmon.rules" \
|
|
||||||
--replace '/bin/ln' '${lib.getBin coreutils}/bin/ln'
|
|
||||||
'';
|
|
||||||
|
|
||||||
meta = with lib; {
|
|
||||||
description = "Udev rules for fancontrol for the Helios64";
|
|
||||||
platforms = platforms.linux;
|
|
||||||
};
|
|
||||||
}
|
|
||||||
) {})
|
|
||||||
];
|
|
||||||
}
|
|
||||||
@ -1,22 +0,0 @@
|
|||||||
{ pkgs, lib, ... }:
|
|
||||||
{
|
|
||||||
systemd.services.heartbeat = {
|
|
||||||
enable = true;
|
|
||||||
description = "Enable heartbeat & network activity led on Helios64";
|
|
||||||
serviceConfig = {
|
|
||||||
Type = "oneshot";
|
|
||||||
ExecStart = ''
|
|
||||||
${lib.getBin pkgs.bash}/bin/bash -c 'echo heartbeat | ${lib.getBin pkgs.coreutils}/bin/tee /sys/class/leds/helios64\\:green\\:status/trigger'
|
|
||||||
|
|
||||||
# this led is not supported yet in the kernel i'm using
|
|
||||||
# ${lib.getBin pkgs.bash}/bin/bash -c 'echo netdev | ${lib.getBin pkgs.coreutils}/bin/tee /sys/class/leds/helios64\\:blue\\:net/trigger'
|
|
||||||
# ${lib.getBin pkgs.bash}/bin/bash -c 'echo eth0 | ${lib.getBin pkgs.coreutils}/bin/tee /sys/class/leds/helios64\\:blue\\:net/device_name'
|
|
||||||
# ${lib.getBin pkgs.bash}/bin/bash -c 'echo 1 | ${lib.getBin pkgs.coreutils}/bin/tee /sys/class/leds/helios64\\:blue\\:net/link'
|
|
||||||
# ${lib.getBin pkgs.bash}/bin/bash -c 'echo 1 | ${lib.getBin pkgs.coreutils}/bin/tee /sys/class/leds/helios64\\:blue\\:net/rx'
|
|
||||||
# ${lib.getBin pkgs.bash}/bin/bash -c 'echo 1 | ${lib.getBin pkgs.coreutils}/bin/tee /sys/class/leds/helios64\\:blue\\:net/tx'
|
|
||||||
'';
|
|
||||||
};
|
|
||||||
after = [ "getty.target" ];
|
|
||||||
wantedBy = [ "multi-user.target" ];
|
|
||||||
};
|
|
||||||
}
|
|
||||||
@ -1,51 +0,0 @@
|
|||||||
{ pkgs, ... }:
|
|
||||||
{
|
|
||||||
systemd.services.helios64-ups = {
|
|
||||||
enable = true;
|
|
||||||
description = "Helios64 UPS Action";
|
|
||||||
serviceConfig = {
|
|
||||||
Type = "oneshot";
|
|
||||||
ExecStart = "${pkgs.systemd}/bin/poweroff";
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
systemd.timers.helios64-ups = {
|
|
||||||
enable = true;
|
|
||||||
description = "Helios64 UPS Shutdown timer on power loss";
|
|
||||||
# disabling the timer by default. Even though armbian enaled
|
|
||||||
# the timer by default through this, we don't, as we can't
|
|
||||||
# rely on the udev rules to disable it after a system switch.
|
|
||||||
# wantedBy = [ "multi-user.target" ];
|
|
||||||
timerConfig = {
|
|
||||||
OnActiveSec = "10m";
|
|
||||||
AccuracySec = "1s";
|
|
||||||
Unit = "helios64-ups.service";
|
|
||||||
};
|
|
||||||
};
|
|
||||||
# The udev rule that will trigger the above service.
|
|
||||||
services.udev.packages = [
|
|
||||||
(pkgs.callPackage (
|
|
||||||
{ stdenv, lib, coreutils, systemd }:
|
|
||||||
stdenv.mkDerivation {
|
|
||||||
name = "helios64-udev-ups";
|
|
||||||
|
|
||||||
dontUnpack = true;
|
|
||||||
dontBuild = true;
|
|
||||||
|
|
||||||
installPhase = ''
|
|
||||||
mkdir -p "$out/etc/udev/rules.d/";
|
|
||||||
install -Dm644 "${./bsp/90-helios64-ups.rules}" \
|
|
||||||
"$out/etc/udev/rules.d/90-helios64-ups.rules"
|
|
||||||
substituteInPlace "$out/etc/udev/rules.d/90-helios64-ups.rules" \
|
|
||||||
--replace '/bin/ln' '${lib.getBin coreutils}/bin/ln' \
|
|
||||||
--replace '/usr/bin/systemctl' '${lib.getBin systemd}/bin/systemctl'
|
|
||||||
'';
|
|
||||||
|
|
||||||
meta = with lib; {
|
|
||||||
description = "Udev rules for UPS for the Helios64";
|
|
||||||
platforms = platforms.linux;
|
|
||||||
};
|
|
||||||
}
|
|
||||||
) {})
|
|
||||||
];
|
|
||||||
}
|
|
||||||
@ -1,8 +0,0 @@
|
|||||||
{ lib, ... }:
|
|
||||||
{
|
|
||||||
# Since 20.03, you must explicitly specify to use dhcp on an interface
|
|
||||||
networking.interfaces.eth0.useDHCP = lib.mkDefault true;
|
|
||||||
|
|
||||||
# Helps with 4GiB of RAM
|
|
||||||
zramSwap.enable = lib.mkDefault true;
|
|
||||||
}
|
|
||||||
Loading…
x
Reference in New Issue
Block a user