From 17bd28ff69e61f881d54cf4c606c04b55a43d478 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 23 Sep 2020 08:57:03 +0800 Subject: [PATCH 1/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support The Allwinner V3/V3s/S3L/SoChip S3 Ethernet MAC and internal PHY is quite similar to the ones on Allwinner H3, except for V3s the external MII is not wired out. Add ethernet support to V3/V3s/S3/S3L. Signed-off-by: Icenowy Zheng --- arch/arm/boot/dts/sun8i-v3.dtsi | 13 ++++++++ arch/arm/boot/dts/sun8i-v3s.dtsi | 52 ++++++++++++++++++++++++++++++++ 2 files changed, 65 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi index 6ae8645ade50..ca4672ed2e02 100644 --- a/arch/arm/boot/dts/sun8i-v3.dtsi +++ b/arch/arm/boot/dts/sun8i-v3.dtsi @@ -9,6 +9,19 @@ &ccu { compatible = "allwinner,sun8i-v3-ccu"; }; +&emac { + /delete-property/ phy-handle; + /delete-property/ phy-mode; +}; + +&mdio_mux { + external_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + &pio { compatible = "allwinner,sun8i-v3-pinctrl"; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index e5312869c0d2..b4069df84d10 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -138,6 +138,15 @@ mixer0_out_tcon0: endpoint { }; }; + syscon: system-control@1c00000 { + compatible = "allwinner,sun8i-v3s-system-control", + "allwinner,sun8i-h3-system-control"; + reg = <0x01c00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-v3s-tcon"; reg = <0x01c0c000 0x1000>; @@ -404,6 +413,49 @@ i2c1: i2c@1c2b000 { #size-cells = <0>; }; + emac: ethernet@1c30000 { + compatible = "allwinner,sun8i-v3s-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio_mux: mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + /* Only one MDIO is usable at the time */ + internal_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + int_mii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + }; + }; + spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; -- 2.28.0 From c3e603b4fb67bcc5da7361c46c11f6101835d54c Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 23 Sep 2020 08:58:53 +0800 Subject: [PATCH 2/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX The UART2 RX/TX pins on Allwinner V3 series is at PB0/1, which is used as debugging UART on some boards. Add pinctrl node for them. Signed-off-by: Icenowy Zheng --- arch/arm/boot/dts/sun8i-v3s.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index b4069df84d10..3932d227ac1c 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -311,6 +311,11 @@ uart0_pb_pins: uart0-pb-pins { function = "uart0"; }; + uart2_pins: uart2-pins { + pins = "PB0", "PB1"; + function = "uart2"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -386,6 +391,8 @@ uart2: serial@1c28800 { reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; status = "disabled"; }; -- 2.28.0 From ada1e0b448d8fd71eac999adbc3a179c0395002a Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 23 Sep 2020 08:58:54 +0800 Subject: [PATCH 3/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node The CSI1 controller of V3/V3s/S3/S3L chips is used for parallel CSI. Add the device tree node of it. Signed-off-by: Icenowy Zheng --- arch/arm/boot/dts/sun8i-v3s.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 3932d227ac1c..f221018d7cf3 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -477,6 +477,18 @@ spi0: spi@1c68000 { #size-cells = <0>; }; + csi1: camera@1cb4000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb4000 0x3000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, -- 2.28.0 From 48cf51ab9126ea032f464157b2cf2a40f9a49be4 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 23 Sep 2020 09:00:11 +0800 Subject: [PATCH 4/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI The CSI1 controller of V3/V3s/S3/S3L SoCs is used for parallel CSI. As we're going to add support for Pine64 SCC board, which uses 8-bit parallel CSI (and the MCLK output), add the pinctrl node of 8-bit CSI and MCLK to the DTSI file. Signed-off-by: Icenowy Zheng --- arch/arm/boot/dts/sun8i-v3s.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index f221018d7cf3..2727756bcd91 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -301,6 +301,20 @@ pio: pinctrl@1c20800 { interrupt-controller; #interrupt-cells = <3>; + /omit-if-no-ref/ + csi1_8bit_pins: csi1-8bit-pins { + pins = "PE0", "PE2", "PE3", "PE8", "PE9", + "PE10", "PE11", "PE12", "PE13", "PE14", + "PE15"; + function = "csi"; + }; + + /omit-if-no-ref/ + csi1_mclk_pin: csi1-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + i2c0_pins: i2c0-pins { pins = "PB6", "PB7"; function = "i2c0"; -- 2.28.0 From e7b7e35f417676ac1e692730c16ab50f9d6e4da4 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 23 Sep 2020 09:00:12 +0800 Subject: [PATCH 5/7] ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank I2C1 controller is available at PE bank, usually used for connecting an I2C-controlled camera sensor. Add pinctrl node for it. Signed-off-by: Icenowy Zheng --- arch/arm/boot/dts/sun8i-v3s.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 2727756bcd91..3cd3b58c2587 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -320,6 +320,12 @@ i2c0_pins: i2c0-pins { function = "i2c0"; }; + /omit-if-no-ref/ + i2c1_pe_pins: i2c1-pe-pins { + pins = "PE21", "PE22"; + function = "i2c1"; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB8", "PB9"; function = "uart0"; -- 2.28.0 From 0ae37e2d02098a198f3d149b2e36b8e862a121ee Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 23 Sep 2020 09:02:14 +0800 Subject: [PATCH 6/7] dt-bindings: arm: sunxi: add Pine64 PineCube binding Document board compatible names for Pine64 PineCube IP camera. Signed-off-by: Icenowy Zheng --- Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index efc9118233b4..ba4a380ba4a3 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -626,6 +626,11 @@ properties: - const: pine64,pine64-plus - const: allwinner,sun50i-a64 + - description: Pine64 PineCube + items: + - const: pine64,pinecube + - const: allwinner,sun8i-v3 + - description: Pine64 PineH64 model A items: - const: pine64,pine-h64 -- 2.28.0 From 6dca04137361a821df34ef83b6f34fd1aa9fbb73 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 23 Sep 2020 09:02:15 +0800 Subject: [PATCH 7/7] ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera The Pine64 PineCube IP camera is an IP camera with SoChip S3 SoC. It comes with a main board, an expansion board and a camera. The main board features a Micro-USB power-only jack, a USB Type-A port, an Ethernet port connected to the internal PHY of the SoC and a Realtek RTL8189ES SDIO Wi-Fi module. A RGB LCD connector is reserved on the board. The expansion board features a TF slot, a microphone, a speaker connector with on-board amplifier and a few IR LEDs. Add support for the kit, with features on the main board and the expansion board now. Signed-off-by: Icenowy Zheng --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-s3-pinecube.dts | 235 ++++++++++++++++++++++++ 2 files changed, 236 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-s3-pinecube.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4572db3fa5ae..4363ba564bb4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1194,6 +1194,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-r16-parrot.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-s3-lichee-zero-plus.dtb \ + sun8i-s3-pinecube.dtb \ sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts new file mode 100644 index 000000000000..9bab6b7f4014 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2019 Icenowy Zheng + */ + +/dts-v1/; +#include "sun8i-v3.dtsi" +#include +#include + +/ { + model = "PineCube IP Camera"; + compatible = "pine64,pinecube", "allwinner,sun8i-s3"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led1 { + label = "pine64:ir:led1"; + gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ + }; + + led2 { + label = "pine64:ir:led2"; + gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */ + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_wifi: vcc-wifi { + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */ + vin-supply = <®_dcdc3>; + startup-delay-us = <200000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */ + post-power-on-delay-ms = <200>; + }; +}; + +&csi1 { + pinctrl-names = "default"; + pinctrl-0 = <&csi1_8bit_pins>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + csi1_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp203", + "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&gic>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pe_pins>; + status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi1_mclk_pin>; + clocks = <&ccu CLK_CSI1_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_ldo3>; + DOVDD-supply = <®_ldo3>; + DVDD-supply = <®_ldo4>; + reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */ + powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi1_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-200 { + label = "Setup"; + linux,code = ; + channel = <0>; + voltage = <190000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_dcdc3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc_wifi>; + vqmmc-supply = <®_dcdc3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&pio { + vcc-pd-supply = <®_dcdc3>; + vcc-pe-supply = <®_ldo3>; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-sys-cpu-ephy"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-dovdd-2v8-csi"; + regulator-soft-start; + regulator-ramp-delay = <1600>; +}; + +®_ldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-1v8-csi"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; -- 2.28.0